Post by musicman on Apr 13, 2015 18:12:33 GMT -6
Everytime i add crawlers to a combine harvestor, the front crawlers turn a little bit (not much about 10 degrees or less) when the back wheels turn. I am refering to the steering left and right, not wheel rotation. Here is the XML parts thats been changed
This mod is your basic NH CR1090 that is skinned to cat lexion.
0>0 right front crawler
0>1 left front crawler
0>2 right rear wheel
0>3 left rear wheel
0>18 steering hydraulics
Thanks
<wheels autoRotateBackSpeed="2">
<wheel rotSpeed="1" restLoad="2.4" repr="0>0|0" driveNode="0>0|0|0" radius="0.43" width="0.48" initialCompression="40" suspTravel="0.1" spring="90" damper="30" mass="0.2" hasTyreTracks="true" tireType="crawler"/>
<wheel rotSpeed="1" restLoad="1.3" repr="0>0|1" radius="0.43" width="0.48" initialCompression="40" suspTravel="0.1" spring="90" damper="30" mass="0.2" hasTyreTracks="true" tireType="crawler"/>
<wheel rotSpeed="1" restLoad="2.4" repr="0>1|0" driveNode="0>1|0|0" radius="0.43" width="0.48" initialCompression="40" suspTravel="0.1" spring="90" damper="30" mass="0.2" hasTyreTracks="true" tireType="crawler"/>
<wheel rotSpeed="1" restLoad="1.3" repr="0>1|1" radius="0.43" width="0.48" initialCompression="40" suspTravel="0.1" spring="90" damper="30" mass="0.2" hasTyreTracks="true" tireType="crawler"/>
<wheel rotSpeed="-1" restLoad="6.4" repr="0>2|0" driveNode="0>2|0|0|0" radius="0.707" width="0.48" initialCompression="50" suspTravel="0.2" spring="45" damper="40" mass="0.35" hasTyreTracks="true"/>
<wheel rotSpeed="-1" restLoad="6.4" repr="0>3|0" driveNode="0>3|0|0|0" radius="0.707" width="0.48" initialCompression="50" suspTravel="0.2" spring="45" damper="40" mass="0.35" hasTyreTracks="true"/>
</wheels>
<dynamicallyLoadedParts>
<dynamicallyLoadedPart node="2|1" linkNode="0>2|0|0|0" filename="$data/vehicles/wheels/trelleborg/trelleborgTM800_600_65R28.i3d"/>
<dynamicallyLoadedPart node="2|0" linkNode="0>3|0|0|0" filename="$data/vehicles/wheels/trelleborg/trelleborgTM800_600_65R28.i3d"/>
</dynamicallyLoadedParts>
<ackermannSteering rotSpeed="48" rotMax="35" rotCenter="0 2.0"/>
<crawlers>
<crawler index="0" speedRefWheel="3" scrollSpeed="0.149" scrollLength="6.69" shaderParameterName="offsetUV" shaderParameterComponent="1" length="1" filename="$data/vehicles/wheels/lizard/crawler.i3d" linkIndex="0>0|0" crawlerIndex="3|0">
<rotatingPart index="1" radius="0.49" />
<rotatingPart index="2" radius="0.49" />
<rotatingPart index="3" radius="0.162" />
<rotatingPart index="4" radius="0.162" />
</crawler>
<crawler index="0" speedRefWheel="5" scrollSpeed="0.149" scrollLength="6.69" shaderParameterName="offsetUV" shaderParameterComponent="1" length="1" filename="$data/vehicles/wheels/lizard/crawler.i3d" linkIndex="0>1|0" crawlerIndex="3|1">
<rotatingPart index="1" radius="0.49" />
<rotatingPart index="2" radius="0.49" />
<rotatingPart index="3" radius="0.162" />
<rotatingPart index="4" radius="0.162" />
</crawler>
</crawlers>
<!-- steering -->
<movingPart index="0>3|0|1" referencePoint="0>2|0|1" referenceFrame="0>" playSound="false" isActiveDirty="true"/>
<movingPart index="0>18|1" referencePoint="0>2|0|2" referenceFrame="0>" playSound="false" isActiveDirty="true">
<translatingPart index="0>18|1|0"/>
</movingPart>
<movingPart index="0>18|2" referencePoint="0>3|0|2" referenceFrame="0>" playSound="false" isActiveDirty="true">
<translatingPart index="0>18|2|0"/>
</movingPart>
</movingParts>
This mod is your basic NH CR1090 that is skinned to cat lexion.
0>0 right front crawler
0>1 left front crawler
0>2 right rear wheel
0>3 left rear wheel
0>18 steering hydraulics
Thanks